1000W Pure Sine Wave Inverter
-
Price:
Negotiable
- minimum:
- Total supply:
-
Delivery term:
The date of payment from buyers deliver within days
-
seat:
Zhejiang
-
Validity to:
Long-term effective
-
Last update:
2020-04-26 19:28
-
Browse the number:
196
+
- Contactaixin:
inverter(Mr.)
- Email: telephone: phone:
-
Arrea:
Zhejiang
Address:Room 2-1, Buliding 2, Botong Huigu Small And Micro Garden, Economic Development Zone, Yueqing, Wenzhou, P.R.China.
-
Website:
http://www.fangpusun-inverter.com/ http://inverter.estonecarving.com/
+
Product description
This kind of 1000W Pure Sine Wave Inverter uses a thyristor circuit to convert direct current into alternating current. When the converter works in the inverter state, if the AC side of the converter is connected to the AC power source, the DC power is inverted to the same frequency AC power and sent back to the power grid, called active inverter. If the AC side of the 1000W Pure Sine Wave Inverter is not connected to the grid and is directly connected to the load, which is, inverting the DC power to an AC supply with a certain frequency or an adjustable frequency, it is called a passive inverter. In addition, the 1000W Pure Sine Wave Inverter has the advantages of compact structure, simple operation, low failure rate, durability as well as high cost effective. It is widely used in power, communications, industrial equipment, satellite communications equipment, military vehicles, medical ambulances, police cars, ships and other fields.
Electrical specifications | ||
Models |
PROsine 1000 |
PROsine 1000i |
Output power |
1000W |
|
Surge rating |
1500W |
|
Output current (peak) 25A |
25A |
|
Output voltage (at no load) |
120Vac+/-3% |
230Vac RMS+/-3% |
Output voltage (over full load and battery voltage range) |
120VacRMS-10%/+4% |
230VacRMS-10%/+4% |
Output frequency |
60+/-0.05(crystal controlled) |
50+/-0.05(crystal controlled) |
Output waveform |
True sine wave(<3%THD) |
|
Peak efficiency(12v/24v) |
89%/90% |
|
No load power draw(search mode) |
<1.5W |
|
No load power draw(idle mode) |
<22W |
|
Input voltage range(12v/24v) |
10-16Vdc/20-32Vdc |
|
Transfer relay rating (hardwire/transfer relay models) |
15A |
|
Transfer time AC to inverter and inverter to AC |
Max 2 cycles(typically 1 cycle)<2.5 seconds with Powersave ON |
|
General specifications | ||
Operating temperature range |
32℉-140℉(0℃-60℃) |
|
Storage temperature range |
-22℉-158℉(-30℃-70℃) |
|
Ac output types |
Dual GFCI receptacle |
|
Hardwire | ||
Hardwire with transfer relay | ||
LCD display panel |
Removable; can be mounted remotely |
|
(requires remote interface kit-see part number section) | ||
Displays DC volts, amps and output power | ||
Recommended DC fuse |
12V:150A or 175A* |
|
24v: 70a OR 90A* | ||
*Depending on applicable installation codes | ||
Dimensions(H*W*D) |
4.5*11.0*15.4 (115*280*390) |
|
Weight |
14.5lb (6.5kg) |
|
Warranty |
Tow year |
|
Part numbers |
||
12-volt |
||
GFCI outlet |
806-1000 |
|
Hardwire with transfer relay |
806-1002 |
|
24-volt |
||
GFCI outlet |
806-1050 |
|
Hardwire with transfer relay |
806-1052 |
|
Remote interface panel |
808-1800 |
|
Wiring cover |
808-1801 |
http://www.fangpusun-inverter.com/