TitleProduct

LRS-35W Switching Power Supply

  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Zhejiang

  • Validity to:

    Long-term effective

  • Last update:

    2019-06-28 11:08

  • Browse the number:

    494

Send an inquiries
+
Zhejiang Hengwei Technology Co., Ltd
Contactaixin:

cnhwele(Mr.)  

Email:

telephone:

phone:

Arrea:

Zhejiang

Address:

No.207, Xinguang Avenue, Xinguang Industrial Zone, Yueqing, Wenzhou, Zhejiang.

Website:

http://www.honwhim.com/ http://cnhwele.estonecarving.com/

+

LRS-35W Series Ultra Thin Single Switching Power Supply

Features:

· Universal AC input / Full range

· Withstand 300VAC surge input for 5 second

· Miniature size and 1U low profile, low weight

· Protections: Short circuit / Overload / Over voltage

· Cooling by free air convection

· No load power consumption<0.5W

· Operating altitude up to 5000 meters (Note6)

· LED indicator for power on

· 100% full load burn-in test

· High efficiency, long life and high reliability

· 3 years warranty


Model

LRS-35-5

LRS-35-12

LRS-35-15

LRS-35-24

LRS-35-36

LRS-35-48

Output

DC voltage

5V

12V

15V

24V

36V

48V

Rated current

7A

3A

2.4A

1.5A

1A

0.8A

Current range

0~7A

0~3A

0~2.4A

0~1.5A

0~1A

0~0.8A

Rated power

35W

36W

36W

36W

36W

38.4W

Ripple & noise

100mVp-p

120mVp-p

120mVp-p

150mVp-p

200mVp-p

200mVp-p

DC voltage ADJ. range

±10%

±10%

±10%

±10%

±10%

±10%

Voltage tolerance Note.3

±3%

±2%

±1%

±1%

±1%

±1%

Line regulation Note.4

±0.5%

±0.5%

±0.5%

±0.5%

±0.5%

±0.5%

Load regulation Note.5

±2%

±1%

±0.5%

±0.5%

±0.5%

±0.5%

Setup, rise, hold up time

800ms, 30ms, 30ms/ 230VAC (full load)

Input

Voltage range

90~264VAC, 127~373VDC

Frequency range

47~63HZ

AC current

0.7A/ 115VAC 0.42A/ 230VAC

Inrush current

Cold start 45A/ 230VAC

Efficiency

83%

86%

87%

88%

89%

90%

Leakage current

<0.75mA/ 240VAC

Protection

Overload

Rated output power 110%~150% start over load protection

Protection type: hiccup mode, auto-recovery after fault condition is removed

Over voltage

Rated output voltage 115%~135% Start over voltage protection

Protection type: hiccup mode, auto-recovery after fault condition is removed

Environment

Working temp, humidity

-30℃~+70℃ (Please refer to "derating curve")

20%~90% RH Non-condensing

Storage temp, humidity

-40℃~+85℃, 10%~95% RH non-condensing

Withstand vibration

10~500HZ,2G 10min/1cycle,period for 60 minutes,each axes

Safety

Withstand voltage

I/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC

Isolation resistance

I/P-O/P, I/P-FG, O/P-FG: 100M ohms/ 500VDC

Fit standard

Safety standards

Compliance to UL60950-1,TUV EN60950-1, GB4943

EMC emission

Compliance to EN55022 (CISPR22) Class A, GB9254 Class B, EN55014, EN61000-3-2,3

EMC immunity

Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, EN61000-6-1

Others

Dimension

99*82*30mm (L*W*H)

Weight / packing

0.23kg/ 60pcs/ 14.8kg/ 0.025m³/ 0.88CUFT

MTBF

≥720K hrs min. MIL-HDBK-217F (25℃)

Note

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance: includes set up tolerance, line regulation and load regulation.

4. Line regulation is measured from low line to high line at rated load.

5. Load regulation is measured from 0% to 100% rated load.

6. The ambient temperature derating of 5℃/1000 m is needed for operating altitude greater than 2000m (6500ft).

7. The power supply is considered as a component which will be installed into a finalequipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests.


http://www.honwhim.com/